Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the cordless handset or if you want to use the cordless
handset with a different base unit of the same model, it is necessary to cancel the
registration from the current base unit.
Only one cordless handset can be canceled at a time.
Make sure the cordless handset and the base unit near each other and are not
being used.
1
Press [CONF/FUNCTION].
2
Press [ ] at "Telephone".
3
Scroll to "Initial setting" by pressing
[ ] or [ ], then press [ ].
4
Scroll to "Registration" by pressing [ ] or
[ ], then press [ ].
5
Scroll to "Deregistration" by pressing [ ]
or [ ], then press [ ].
6
Press [3][3][5] to delete the registration
memory.
• If you make a mistake, press [HOLD/CLEAR],
then enter "335".
7
Press the soft key (
• The registration memory will be erased on both
the cordless handset and the base unit.
• If a long beep sounds, you entered a wrong
code.
Enter "335", then press the soft key (
• To register the cordless handset to another base
unit of the same model, start from step 6 on page
69 or see page 27.
• "[-]" is shown on the top right of the display.
• After canceling registration, the cordless handset will not work. To use it again,
registration will be required (p. 27, 69).
68
).
OK
OK
Handset
Telephone
Initial setting
Registration
Deregistration
Deregistration
Enter code:335
Ex. Extension number 2
SP
IN USE
Handset [2]
Deregistered
).
:335
[-]