Panasonic KX-TG2970B Operating Instructions Manual page 15

5
Base unit: Select the desired setting by
pressing [ ] or [ ], then press [ ] (Save).
(For "Date and time", p. 18, press [ ] (Save)
instead of [ ].)
Cordless handset: Select the desired setting
by pressing [ ] or [ ], then press the soft
key ( ).
SAVE
• The unit beeps 3 times and the setting is saved.
6
Base unit: Press [STOP] to exit programming mode.
Cordless handset: Press [OFF] to exit programming mode.
Useful information
• "---------------" indicates the beginning or end of the function menu.
• You can go back to the previous display by pressing [ ] except when entering
characters or numbers. To return to the main menu from the sub-menu, press [ ].
• After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
tables on pages 16 and 17.)
• To exit the programming mode:
For the base unit, press [STOP
• If you do not press any buttons for 60 seconds, the unit will exit programming
mode.
• If the unit detects a problem, an error message will be displayed (p. 70–72).
• If a long beep is heard when you tried to save the setting, programming fails. You
need to try again.
For assistance, please call: 1-800-ADT-ASAP
Programmable Settings
]
. For the cordless handset, press [OFF].
Base unit example
Incoming call
tone :2
=Save
Handset example
Incoming call
tone :2
A D T PANIC SAVE
15