Dell E01B002 Owner's Manual page 81

Figure 28. Removing a processor
1. socket-release lever 1
3. processor
5. processor shield
7. processor socket
Next steps
1. If you are removing the processor permanently, install the processor blank.
2. Install a processor.
3. Install the heat sink.
4. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 48
Related tasks
Before working inside your system
Removing the cooling shroud
Installing a processor on page 82
Installing a processor blank and DIMM blank
Installing a heat sink on page 83
After working inside your system
on page 48
on page 52
on page 86
on page 49
2. pin–1 corner of the processor
4. slot (4)
6. socket-release lever 2
8. tab (4)
Installing and removing sled components 81