Installing A Sled - Dell E01B002 Owner's Manual

Figure 6. Removing a sled
1. release button
3. sled
Next steps
1. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 48
Related tasks
Before working inside your system
After working inside your system

Installing a sled

Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1. Press the release button on the sled handle to the open position.
2. Align the sled with the bay on the enclosure.
3. Slide the sled into the enclosure until the sled connectors are firmly engaged with the interposer connectors.
The sled handle rotates toward the enclosure as the sled slides into the enclosure.
4. Press the sled handle to closed position until the release button clicks into place.
5. Turn on the sled.
50 Installing and removing sled components
on page 48
on page 49
2. sled handle
4. FX2 or FX2s enclosure