Unpacking & Inspecting - Cold Jet PR350H Pre-Installation

Pre-Installation Guidelines & Checklist
Unpacking & Inspecting
This machine has been assembled and tested at Cold Jet's test center before being crated and
shipped as one unit (excluding hydraulic oil). Follow the steps below to unpack and inspect the
machine from the shipping container.
1. Examine the shipping container for any damages that may have occurred during
transport.
2. Remove the machine, box(es) that contain accessories, and discard packing material,
braces, and ties.
3. Examine the machine for any external damage that may have occurred during
transport.
4. Open the cabinet doors of the machine and examine the machine for any internal
damage that may have occurred during transport.
5. Open the front cabinet door and locate the box on the machine floor containing user
documentation, discharge chute(s), optional spare parts kit(s), and other accessories.
Refer to the packing slip for a list of the components shipped with the machine. Document any
damage that has occurred to the shipping container or the machine with photos and contact
Cold Jet's project lead (refer to the "Cold Jet Project Lead" on the front page or the contact
details of the appropriate office on the last page).
2