Terms Of Warranty; Cleaning The Pr120H - Cold Jet PR350H Pre-Installation

Terms of Warranty

In order to comply with the terms of the warranty, and for safety reasons, repairs other than those stated above require
relevant tools and equipment and therefore must always be made either by a Cold Jet technician or by the owner's qualified
personnel who has been trained by Cold Jet in the repair and maintenance of Cold Jet dry ice blasting and dry ice production
machines and accessories. Beyond the necessary knowledge, the person concerned must have appropriate tools and
equipment, as well as the auxiliary materials required, at his disposal.
The liability of the manufacturer under the terms of the CE endorsement as regards safety may become
invalid:
If repairs are made using non-Cold Jet spare parts.
●
If repairs are made by unqualified personnel.
●
If repairs are unsatisfactory due to lack of relevant tools and equipment.
●
In such cases, the liability of the manufacturer will be solely confined to any manufacturing faults/errors made prior to the
machine being delivered and before repairs/replacements have been made.

Cleaning the PR120H

The following steps are necessary when the PR120H needs to be cleaned.
Disconnect the power.
●
Protect all electronic equipment.
●
All surfaces can be cleaned with a degreaser and acid-free oil. If the bottom of the PR120H is full of water/oil there is a
drain plug on the backside of the PR120H.
Always close the drain after use.
PR120H
User's manual
Version: 5
Page: 21 of 26
Date: 09.11.2022