Table of Contents
Advertisement
3.2 Accessing the System
The CSE-418HTS chassis features a removable top cover, which allows easy access to the
inside of the chassis.
Removing the Top Cover
1. Remove the two screws at the front of the top cover.
2. Press the two release buttons and slide the cover toward the rear.
3. Lift the top cover up.
Check that all ventilation openings on the top cover and the top of the chassis are clear and
unobstructed.
Caution: Except for short periods of time, do not operate the server without the cover in place.
The chassis cover must be in place to allow for proper airflow and to prevent overheating.
Release Buttons
Chapter 3: Maintenance and Component Installation
Figure 3-1. Removing the Chassis Cover
30
Advertisement
Table of Contents
Troubleshooting
