Operating With Web Browser - Panasonic TH-98SQ1W Operating Instructions Manual

For [User]
5
Enter the new user name and password, and
then click [Change].
The screen of step 3 is displayed again.
6
Enter the new user name and password.
Enter the new user name and password set in step
5.
7
Click [OK].
Note
●
The password used here is the same password
used for command control and the PJLink security
authentication.
●
Default user name and password are as follows:
User name: dispuser (user rights)
dispadmin (administrator rights)
Password: @Panasonic
Change password first.
●
When [Reset] for [Network settings] of this unit is
executed, the password change is also required after
log-in. (see page 75)
●
The password can be changed on the Password
Setup screen after logging in (see page 98). Log in
with administer privileges to change this.
● If a wrong user name/password is entered 3 times
when you log in, the field will be locked for several
minutes.
●
When using "Crestron Connected" (see page 99), log
in with the administrator rights.
●
Depending on the browser, displayed operations may
change.
●
Under no circumstances, Panasonic Corporation or
its associated companies will ask customers their
password directly.
Even if you are asked directly, please do not reveal
your password.

Operating with Web Browser

■
Description of each section
Page tab
Click these to switch pages.
[Status]
Click this item, and the status of the Display is
displayed.
[Display control]
Click this item to display the Display control page.
[Detailed set up]
Click this item to display the advanced settings
page.
[Change password]
[Crestron Connected]
Click this item to display the Crestron Connected
operation page.
[Browser Remote Control]
Click this item to display the Browser Remote
Control on the WEB browser, which is the same as
the supplied remote control.
■
Display status page
Displays the display status.
Click [Status] → [Display status].
Displays the type of Display.
Displays the firmware version of the display.
93
English