Sage the Custom Loaf Pro BBM800BSSUK Manual page 3

• Should you need to change this plug, please
complete the rewiring as follows (after safe
disposal of the moulded plug).
• Please note that a cut off plug inserted into
a socket is a serious danger risk.
• Wires are coloured as follows:
−Blue = Neutral
−Brown = Live
−Green & Yellow = Earth
• As the colours of the wire may not correspond
with the coloured markings which identify
the terminals in your plug, please refer to the
following:
−The Blue wire must be connected to
the terminal which is marked 'N'.
−The Brown wire must be connected to the
terminal which is marked with the letter 'L'.
−The Green & Yellow wire must be connected
to the terminal which is marked with
the letter E or the earth symbol .
• Please note that if a 13 amp plug is used,
a 13 amp fuse should be used.
• Remove and safely discard any packaging
material and promotional labels before using the
Custom loaf bread maker for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this appliance.
• Do not place the bread machine near the edge
of a bench or table during operation. Ensure the
surface is level, clean and free of water, flour and
other substances. Vibration during the kneading
cycles may cause the machine to move slightly.
• Do not place this appliance on or near a
hot gas or electric burner, or where it could
touch a heated oven. Position the appliance
at a minimum distance of 10cm away from
walls. This will help prevent the possibility of
discolouration due to radiated heat.
• Always operate the bread machine on a stable
and heat resistant surface. Do not use on
a cloth-covered surface, near curtains or other
flammable materials.
• Do not operate the bread machine on a sink
drain board.
3