Sage the Custom Loaf Pro BBM800BSSUK Manual page 23

11. Remove the Bread Pan
a. When the cycle is complete, an alert will sound and the 'keep
warm' phase will automatically begin to count up to 60 minutes.
To retain a crisp loaf crust, we recommend removing the bread
pan at the beginning of the 'keep warm' cycle. Press and hold
the CANCEL button. With protective hot pads or insulated oven
mitts, lift open the lid. Hold the bread pan by the handle and lift
straight up. Place the bread pan on a wire rack. Be careful not to
place it on a tablecloth, plastic surface, or other heat-sensitive
surface which may scorch or melt.
NOTE
The appliance surfaces, including the lid, are hot during and
after operation. To prevent burns or personal injury, always use
protective hot pads or insulated oven mitts when removing the
bread pan from the baking chamber, and when removing the baked
bread or jam from the bread pan.
b. If the CANCEL button is not pressed and held after the 'bake'
phase, the bread maker will automatically commence the 'keep
warm' phase. This phase holds the temperature of the baked
bread for up to 60 minutes before automatically turning off.
During the 'keep warm' phase, the LCD screen will count-up
indicating how long the baked loaf has been kept warm.
The 'keep warm' phase is activated on the BASIC, BASIC
RAPID, WHOLE WHEAT, WHOLE WHEAT RAPID,
GLUTEN FREE, CRUSTY LOAF, SWEET and YEAST FREE
settings. To turn off the 'keep warm' phase, or to reduce the
60 minute keep warm time, refer to 'Using the MODIFY
button'.
NOTE
To retain a crisp loaf crust, remove the bread pan before the
'keep warm' phase. The sides of the loaf may concave and become
soggy or the crust may become harder and darker during the
'keep warm' phase.
12. Remove Bread from the Bread Pan
a. With protective hot pads or insulated oven mitts, hold the bread
pan handle to one side and turn the bread pan upside down onto
a wire rack. Gently shake the bread out of the bread pan.
The paddle should remain in the bread pan. If it is stuck in the
bread, use a non-metal utensil to gently remove it, taking care not
to scratch the paddle.
TIPS
If the bread is difficult to remove, turn the bread pan on its side and
with protective hot pads or insulted oven mitts, wiggle the coupling
on the underside of the bread pan a few times. This will loosen the
paddle from the bread. Over-turning the coupling can drive the
paddle further into the bread and create a large hole.
23