Advertisement
Quick Links
TM/LM-4010 & TM/LM-4011
& TM/LM-4011LVDS
POS Monitor User Manual
Views of TM/LM-4010 & TM/LM-4011 & TM/LM-
4011LVDS
Front View of TM/LM-4010
9.7" LM-4010 LCD Panel
9.7" TM-4010 P-CAP Touch Panel
Front View of TM/LM-4011 & TM/LM-4011LVDS
10.1" LM-4011 LCD Panel
10.1" TM-4011 P-CAP Touch Panel
10.1" LM-4011LVDS LCD Panel
10.1" TM-4011LVDS LCD Panel
19640901040 Ver. D0
http://www.posiflex.com
Package Contents
9.7" TM/LM-4010 or 10.1" TM/LM-4011
or 10.1" TM/LM-4011LVDS POS
Monitor......................................(x 1)
Mounting Kits ................................(x 1)
User Manual................................(x 1)
Camera (Optional)
Camera (Optional)
1
Advertisement
Related Manuals for POSIFLEX TM-4011LVDS
Summary of Contents for POSIFLEX TM-4011LVDS
- Page 1 Camera (Optional) 9.7” LM-4010 LCD Panel 9.7” TM-4010 P-CAP Touch Panel Front View of TM/LM-4011 & TM/LM-4011LVDS Camera (Optional) 10.1” LM-4011 LCD Panel 10.1” TM-4011 P-CAP Touch Panel 10.1” LM-4011LVDS LCD Panel 10.1” TM-4011LVDS LCD Panel 19640901040 Ver. D0 http://www.posiflex.com...
- Page 2 SOME IMPORTANT NOTES FCC NOTES This system meets industry & government requirements and applicable standards. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment.
- Page 3 Mounting your Monitor to RT-series POS Terminals The following instructions are provided to help you mount your TM/LM monitor to Posiflex RT-series POS terminals. During installation, please ensure the terminal is properly turned off and disconnected from the power sources to avoid potential hazards.
- Page 4 Tear off the release liner from the protective strip which is clipped onto the mounting bracket. Lift the monitor, align the two screws holes located on the mounting bracket with those on the top of the system compartment of RT-series terminals and then secure the monitor with two fixing screws.
- Page 5 For TM/LM-401x, well insert the cable to the internal VGA port from the mainboard of RT-series terminal, and tuck the extra cable inside the system compartment. For TM/LM-4011LVDS, well insert the cable to the internal LVDS connector from the mainboard of RT-1016A-G2 terminal, and tuck the extra cable inside the system compartment.
- Page 6 Identifying your Monitor as Secondary Touchscreen Monitor in Extended Mode In the following section the related descriptions will be offered to help you set up TM series as the extended monitor when you attempt to extend the desktop across multiple monitors For TM-4010/4011/4011LVDS Models with P-CAP Touchscreen If your monitors are TM-4010/4011/4011LVDS models, you may configure the display settings from Control Panel in Microsoft Windows to identify the...
-
Page 7: Installing Drivers
POS terminals and electricity is supplied to the monitor through POS terminal. Installing Drivers Please visit Posiflex official website to download and install the related drivers. http://www.posiflex.com/en-global/Download/download) Setting up Display Resolution for Your Monitor The below chart defines the list of recommended display settings for TM/LM monito. -
Page 8: Specification
TM-4011: USB TM-4010: USB TM-4011LVDS: USB LM-4010: N/A LM-4011: N/A ※ The product information and specifications are subject to change without prior notice. To get the detailed information on TM-4010/LM-4010/TM- 4011/LM-4011/TM-4011LVDS/LM-4011LVDS please check this model from Posiflex Global Website (http://www.posiflex.com/en-global/Download/download). - Page 9 BSMI ROHS...
- Page 10 <MEMO>...
- Page 11 <MEMO>...
- Page 12 <MEMO>...
Need help?
Do you have a question about the TM-4011LVDS and is the answer not in the manual?
Questions and answers