Table Of Contents - NavLinkz RL4-NAC12 Manual

Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the compatibility of vehicle and accessories
1.3. Warning notes
1.4. Connection Video-Interface
1.5. Settings of the 8 Dip switches
1.5.1. Enabling the interface's video inputs AV1-R and AV2-L (dip 1-2)
1.5.2. Activating - front camera back-switching V3 Front (dip 3)
1.5.3. Activation signal - video sources (dip 4)
1.5.4. Rear-view camera settings (dip 5)
1.5.5. Activating the guidelines (dip6)
1.5.6. Activating the factory PDC display (Dip-8)
1.6. Settings of the 2 Dip switches
2. Installation
2.1. Place of installation - video interface
2.2. Connection schema
2.3. Connection - head-unit
2.3.1. Connection - picture signal cable
2.3.1.1. Low version head unit (1 x 4 PIN HSD)
2.3.1.2. High version head unit (2 x 4 PIN HSD)
2.3.2. Connection- Power / CAN
2.3.3. Installation with analogue connection (without CAN-Bus)
2.4. Power supply output
2.5. Connection - video sources
2.5.1. Audio insertion
2.5.2. After-market rear-view camera
2.5.2.1. Case 1: Video-interface receives the reverse gear signal
2.5.2.2. Case 2: Video interface does not receive the reverse gear signal
2.5.3. After-market front camera
2.5.4. After-market mirror cameras
2.6. Connection - external keypad
2.7. Picture settings
3. Interface operation
4. Specifications
5. FAQ - Trouble shooting
6. Technical support
Version 29.11.2022 HW: BOT(V43)(V54) RL4-NAC12