Interface Operation; Specifications - NavLinkz RL4-NAC12 Manual

3. Interface operation

The interface's enabled inputs can be switched by the external keypad.
 Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources. If all inputs are activated by dip switch
settings, the order is the following:
Factory video
Each long press will switch to the next enabled input. Inputs which are not enabled will be
skipped.
Note: The interface switches after releasing the switch (after long pressure).
 Short press of keypad (only if DIP 3 is set to ON)
By short pressing the external keypad, the video interfaces witches from the factory video to
the front camera input and back to factory video.

4. Specifications

BATT/ACC range
Stand-by power drain
Power
Video input
Video input formats
Temperature range
Dimensions Video-Box
Version 29.11.2022
 
Left (V1) Right (V2)
7V - 25V
5mA
280mA @12V
0.7V – 1V
NTSC
-40°C to +85°C
117 x 25 x 108 mm (W x H x D)
HW: BOT(V43)(V54)

factory video
RL4-NAC12