Connection - Picture Signal Cable; Low Version Head Unit (1 X 4Pin Hsd) - NavLinkz RL4-NAC12 Manual

2.3. Connections to the head-unit
Remove the vehicle's head unit

2.3.1. Connection - picture signal cable

2.3.1.1.

Low version head unit (1 X 4pin HSD)

Connect the waterblue
to the waterblue coloured 4pin HSD connector of the video interface.
Disconnect the single female 4pin HSD connector of the vehicle
harness at the rearside of the head unit and connect it to the
male 4pin HSD connector of the enclosed 4pin HSD harness.
Connect the waterblue
to the previously become free black 4pin HSD connector at the
rearside of the head unit.
Version 29.11.2022
coloured female 4pin HSD connector „to interface"
coloured female 4pin HSD connector
HW: BOT(V43)(V54) RL4-NAC12