Checking The Compatibility Of Vehicle And Accessories - NavLinkz RL4-NAC12 Manual

1.2.

Checking the compatibility of vehicle and accessories

Brand Compatible vehicles
C4 since 11/2020,
C5 X since 02/2022,
Citroen
DS3 Crossback since 12/2018,
DS4 since 11/2021-
Corsa F since model year 2019
Opel
Mokka B since 09/2020
208 II since 06/2019,
2008 II since 11/2019,
308 III since 09/2021,
Peugeot
3008 II since 05/2021,
508 II since 10/2018,
5008 II since 10/2020
Limitations
Inserted video picture
Video only
Factory rear-view camera
After market front camera
Video input signal
Mirror cameras
Guidelines and PDC
NAC high-version
Version 29.11.2022
Compatibility
Infotainment systems
NAC oder DS Connect Radio/Nav with
10.25inch touch monitor
For Continental High version an additional
cable CAB-HSD-MF026 might be required
NAC or RCC with 10.25inch touch monitor
For Continental High version an additional
cable CAB-HSD-MF026 might be required
NAC or RCC with 10.25inch touch monitor
For Continental High version an additional
cable CAB-HSD-MF026 might be required
In the inserted video picture of Peugeot 308 (front and rear view
camera, video 1 and video 2) a 2-3 mm wide stripe is known which
remains on the right side and cannot be faded out.
The interface inserts ONLY video signals into the infotainment.
For audio inserting, use the possibly existing factory audio-AUX-
input or a FM-modulator. If 2 AV-sources shall be connected to the
infotainment, for audio switching an additional electronic part is
required.
Automatic switching-back from inserted video to factory rear-view
camera is only possible while the reverse gear is engaged. To delay
the switch-back, an additional electronic part is required.
The front camera will automatically be switched for 10, 15 or 20
seconds (adjustable) after disengaging the reverse gear. A manually
front camera switching is possible by external keypad.
NTSC video sources compatible only.
If mirror cameras are connected, use only cameras which are
resistant to continuous current.
Displayed guidelines and PDC are not available in all vehicles.
Guidelines can only be displayed together with PDC.
If the two HSD connectors cannot be separated for the
reconnection of the white HSD socket, the separately available
cable CAB-HSD-MF026 can optionally be connected here.
HW: BOT(V43)(V54) RL4-NAC12