Table of Contents
Advertisement
6. Reboot the machine and retry the import of the RAID configuration.
7. If the problem persists, contact technical support.
• FQXPMCL0008I: Export uefi settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0008K: Failed to export uefi settings.
Severity: Warning
User Action:
1. Ensure proper connection to USB/network drive and retry to export uEFI setting.
2. Reboot and try the uEFI setting export again.
3. Reflash UEFI firmware.
4. If the problem persists, contact technical support.
• FQXPMCL0009I: Import uefi settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0009K: Failed to import uefi settings.
Severity: Warning
User Action:
1. Ensure proper connection to USB/network drive and retry the uEFI setting import.
2. Ensure that same system model type to import the uEFI setting and UEFI version should be the same.
3. Reboot and try to import a new clone of the UEFI settings.
4. Reflash UEFI firmware.
5. If the problem persists, contact technical support.
• FQXPMCL0010I: Export bmc settings successfully.
Severity: Info
User Action:
Information only; no action is required.
• FQXPMCL0010K: Failed to export bmc settings.
Severity: Warning
User Action:
1. Restart BMC via supported method and reboot the system.
2. Perform AC reset.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
.
Chapter 4
XClarity Provisioning Manager events
191
Advertisement
Table of Contents
