Table of Contents
Advertisement
Information only; no action is required.
• FQXSPSE4054I: IPMI SEL wrapping mode is [arg1] by user [arg2] at IP address [arg3].
IPMI SEL wrapping mode is changed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0264
User Action:
Information only; no action is required.
• FQXSPSE4055I: SED encryption is enabled by user [arg1] at IP address [arg2].
SED encryption is enabled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0265
User Action:
Information only; no action is required.
• FQXSPSE4056I: SED AK is [arg1] by user [arg2] at IP address [arg3].
SED AK is regenerated or recovered.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0266
User Action:
Information only; no action is required.
• FQXSPSE4057I: User [arg1] created by user [arg2] from [arg3] at IP address [arg4].
A user account was created by user
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0267
User Action:
Information only; no action is required.
• FQXSPSE4058I: User [arg1] removed by user [arg2] from [arg3] at IP address [arg4].
.
Chapter 2
XClarity Controller events
121
Advertisement
Table of Contents
