Table of Contents
Advertisement
Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFMA0001I
DIMM [arg1] Disable has been recovered. [arg2]
The uncorrectable memory error state has been cleared.
FQXSFMA0002I
FQXSFMA0006I
[arg1] DIMM [arg2] has been detected, the DIMM serial number is
[arg3].
FQXSFMA0007I
[arg1] DIMM number [arg2] has been replaced. [arg3]
FQXSFMA0008I
DIMM [arg1] POST memory test failure has been recovered. [arg2]
FQXSFMA0009I
Invalid memory configuration for Mirror Mode has been recovered.
[arg1]
FQXSFMA0010I
Invalid memory configuration for Sparing Mode has been recovered.
[arg1]
FQXSFMA0011I
Memory population change detected. [arg1]
FQXSFMA0012I
The PFA of DIMM [arg1] has been deasserted.
FQXSFMA0014I
Memory spare copy initiated. [arg1]
FQXSFMA0015I
Memory spare copy has completed successfully. [arg1]
FQXSFMA0026I
DIMM [arg1] Self-healing, attempt post package repair (PPR) at Rank
[arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6]. [arg7]
FQXSFMA0029I
The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]
FQXSFMA0046I
DIMM [arg1] is Intel Optane PMEM and its volatile or non-volatile
capacity will be inaccessible because that configuration mode is not
supported on current platform.
FQXSFMA0051I
DIMM [arg1] has been disabled due to memory population rule
conflict.[arg2]
FQXSFMA0052I
DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]
FQXSFMA0059I
Bank Sparing executed on High Bandwidth Memory CPU [arg1]
Channel [arg2] Pseudo-Channel [arg3].
FQXSFMA0060I
Partial Cache Line Sparing executed on High Bandwidth Memory
CPU [arg1] Channel [arg2] Pseudo-Channel [arg3].
FQXSFPU0020I
The UEFI firmware image capsule signature is invalid.
The TPM physical presence state has been cleared.
FQXSFPU0021I
FQXSFPU0023I
Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.
FQXSFPU0025I
The default system settings have been restored.
FQXSFPU4034I
TPM Firmware recovery is finished, rebooting system to take effect.
FQXSFPU4038I
TPM Firmware recovery successful.
FQXSFPU4041I
TPM Firmware update is in progress. Please DO NOT power off or
reset system.
FQXSFPU4042I
TPM Firmware update is finished, rebooting system to take effect.
140
ThinkSystem SD665 V3 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Advertisement
Table of Contents
