Lenovo 7D9P Manual page 13

Hide thumbs Also See for 7D9P:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPDM4005I
User [arg1] has generated a new encryption key pair and installed a
self-signed certificate for the TKLM client.
FQXSPDM4006I
User [arg1] has generated a new encryption key and certificate
signing request for the TKLM client.
FQXSPDM4007I
User [arg1] has imported a signed certificate for the TKLM client from
[arg2].
FQXSPDM4008I
User [arg1] has imported a server certificate for the TKLM server.
FQXSPDM4009I
User [arg1] has [arg2] file [arg3] from [arg4].
FQXSPDM4010I
Inventory data collecting and processing complete for [arg1],
sequence number is [arg2].
FQXSPEA2001I
Sensor [SensorElementName] has deasserted the transition from
normal to non-critical state.
FQXSPEA2002I
Sensor [SensorElementName] has transitioned to a less severe state
from critical.
FQXSPEA2003I
Link up is detected on port [arg1] of the PCIe device [arg2].
FQXSPEM0003I
The Log [RecordLogElementName] has been cleared.
FQXSPEM0004I
The Log [RecordLogElementName] is full.
FQXSPEM0005I
The Log [RecordLogElementName] is almost full.
FQXSPEM0009I
The System [ComputerSystemElementName] has generated an
auxiliary Log Entry in Log [RecordLogElement].
FQXSPEM4000I
The [arg1] on system [arg2] cleared by user [arg3].
FQXSPEM4001I
The [arg1] on system [arg2] is 75% full.
FQXSPEM4002I
The [arg1] on system [arg2] is 100% full.
FQXSPEM4003I
LED [arg1] state changed to [arg2] by [arg3].
FQXSPEM4004I
SNMP [arg1] enabled by user [arg2] .
FQXSPEM4005I
SNMP [arg1] disabled by user [arg2] .
FQXSPEM4006I
Alert Configuration Global Event Notification set by user [arg1]:
RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4].
FQXSPEM4007I
Alert Recipient Number [arg1] updated: Name=[arg2],
DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=
[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8] by user [arg9] from
[arg10] at IP address [arg11].
FQXSPEM4008I
SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2],
AllowedFilters=[arg3] .
FQXSPEM4009I
The UEFI Definitions have been changed.
FQXSPEM4010I
UEFI Reported: [arg1].
FQXSPEM4011I
XCC failed to log previous event [arg1].
FQXSPEM4012I
User [arg1] made system [arg2] Encapsulation lite Mode.
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
.
Chapter 2
XClarity Controller events
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem sd665 v3

Table of Contents