Translation of the original operating instructions MANY THANKS FOR PLACING YOUR TRUST IN US We would like to congratulate you on purchasing this product from Wagner; we are sure that you will enjoy working with it greatly. We would be happy to be of assistance if you have any questions, suggestions or requests.
W 690 Flexio Extra Spray Kit 1. Explanation of symbols used This symbol indicates a potential danger for you or for the device. Under this symbol you can find important information on how to avoid injuries and damage to the device.
Page 11
W 690 Flexio Extra Spray Kit heat, oil, sharp edges or moving tool parts. Damaged or twisted leads increase the risk of an electric shock. e) If you work outdoors with a power tool, only use extension cables suitable for outdoor use.
W 690 Flexio Extra Spray Kit 4. Usage and treatment of the electric tool a) Do not overload the tool. Use the power tool designed for the work that you are doing. You work better and safer in the specified performance range if you use the suitable power tool.
Page 13
(Fig. 1, item 17) do not operate the unit further! Dismantle and clean the ventilating hose, valve and diaphragm and replace the diaphragm if necessary. • Do not lay the spray gun. With original WAGNER accessories and spare parts, you have the guarantee that all safety regulations are fulfilled.
W 690 Flexio Extra Spray Kit 4. Description/ Scope of delivery Description/ Scope of delivery (Fig. 1) 1) Air cap 2) Nozzle 3) Union nut 4) Spray jet width adjustment 5) Wall Extra I-Spray spray attachment 6) Trigger 7) Material volume regulation...
W 690 Flexio Extra Spray Kit 6. Preparation of the workplace (for interior wall paint) Sockets and plugs must be masked. Risk of an electric shock as a consequence of sprayed material entering the socket! Mask all the areas and objects that are not to be spray painted, or remove them from the work area.
W 690 Flexio Extra Spray Kit Wall Extra I-Spray spray attachment 3. Unscrew the container from the spray gun. 4. Aligning suction tube. (Fig. 4) If the suction tube is positioned correctly, the container contents can be sprayed without almost any residue.
W 690 Flexio Extra Spray Kit 10. Selecting the Spray Setting (Wall Extra I-Spray spray attachment) WARNING! Danger of injury! Never pull the trigger guard while adjusting the air cap. 2 different spray jet shapes can be set by turning the air cap (fig. 10, 1) Tighten the union nut (Fig.
W 690 Flexio Extra Spray Kit 13. Setting the Amount of Air (Fig. 14) Depending on the viscosity of the material to be sprayed and the finish of the object to be coated, it may be advisable to vary the amount of air. Very low viscosity materials, such as watery glazes do not have to be atomised with the maximum amount of air.
W 690 Flexio Extra Spray Kit container or by pulling the trigger guard and letting the paint into the original paint container. 2) Divide the spray gun. Press the hook (Fig. 5 ) slightly downwards. Turn the gun front part and gun rear part against each other and take them apart.
W 690 Flexio Extra Spray Kit 17. Cleaning the Gravity spray attachment 1) Unscrew the container cover and pour any remaining coating material back into the original container. CAUTION! Never clean seals, diaphragm and nozzle or air holes of the spray gun with metal objects.
W 690 Flexio Extra Spray Kit the air filter compartment (Fig. 26, A). Replace both air filters (Fig. 26, B). Close the cover of the air filter compartment. Ventilating hose / Valve (Wall Extra I-Spray spray attachment) • Pull the ventilating hose (Fig. 18, A) at the top from the gun body. Screw off the valve cover (B).
20. Accessories The CLICK&PAINT SYSTEM with additional spray attachments and accessories offers the right tool for each work. Further information about the WAGNER range of products for renovating is available under www.wagner-group.com 21. Environmental protection The device and all accessories and packaging have to be recycled in an environmentally friendly manner.
W 690 Flexio Extra Spray Kit manufacturer and have been mounted to the device and are operated properly. If third- party accessories or spare parts are used, the manufacturer is exonerated wholly or partly from his/her liability if use of the third-party accessories or spare parts have caused a defect in the product.
W 690 Flexio Extra Spray Kit Malfunction Cause Remedy • Too much fog of Distance to the object too large ➞ Reduce distance • coating material Too much coating material applied ➞ Reduce the material (Overspray) volume • Amount of air too high ➞...
Page 25
The guarantee expires if the tool is opened up by persons other than WAGNER service personnel. Transport damage, maintenance work and loss and damage due to faulty maintenance work are not covered by the guarantee. Under any guarantee claim, there must be proof of purchase of the tool through submission of the original receipt.
Need help?
Do you have a question about the W 690 FLEXIO and is the answer not in the manual?
Questions and answers