Feed Dog Height - Brother S-6280A Instruction Manual

5-3. Feed dog height

1. Turn on the power.
2. Set the feed pitch to 5mm.
<-813>
0.9mm
<-815>
*The standard height when the feed dog (1) is raised most
1.2mm
from the top surface of the needle plate is 0.9mm for the-813
specification and 1.2mm for the-815 specification.
3. Turn the sewing machine pulley and stop the feed dog (1)
(3)
4. Lower the sewing machine.
(2) 5. Loosen the screw (2).
6. Turn the vertical feed arm (3) and move the feed bar (4) up
(4)
S-6280A
at the uppermost position.
and down to adjust.
5. Standard adjustment
36