Table of Contents
Advertisement
5.
Latched Faults option, enable / disable all faults to works in latched mode or unlatched mode, so that when the fault condition is restored, the related event is
automatically reset. Press on the back arrow
6.
Show zones option, enable / disable Virtual Zone Led Indicators on the main panel screen as shown on the picture at right. Each Zone is represented by a Virtual
LED that change color based on the Zone status: Red = Alarm, Yellow = Fault, Blu = Test, Orange = Disablement. Press on the back arrow
previous screen.
M-169.1-SERIE-PL-EN / 09.2022
to go back to the previous screen.
Fire Alarm Control Panel PL-1000
to go back to the
37
Advertisement
Table of Contents
