Table of Contents
Advertisement
13.6 Configuration – description
1.
From the "Program menu", press the "Description" icon
and the "Sounders" icon
2.
To define a Zone, press on the icon
keyboard appears to enter the description. It is possible to insert up to 20 characters. Press the "enter" key to save and confirm the zone description. Press the
back arrow
to go back to the previous screen.
M-169.1-SERIE-PL-EN / 09.2022
; the "Zone" icon
allows you to define the sounders.
, then press at the right side of the zone number (e.g. Z01), below the icon
allows you to define the zones, the "Point" icon
Fire Alarm Control Panel PL-1000
allows you to define the points
and type the name of the zone. A QWERTY
41
Advertisement
Table of Contents
