Attaching Mounting Accessories; Using A Wall Mount Adapter - NEC MultiSync UX552 User Manual

Attaching Mounting Accessories

The monitor is designed for use with the VESA mounting system. Be careful to avoid tipping the monitor when attaching
accessories.
Mounting accessories can be attached with the monitor in the face down position. To avoid scratching the LCD panel, always
place a soft cloth, such as a blanket that is larger than the monitor's screen area, on the table before laying the monitor face
down. Make sure there is nothing on the table that can damage the monitor.
When using mounting accessories other than NEC compliant and approved, they must comply with the VESA Flat Display
Mounting Interface Standard (FDMI).

NOTEE:
Prior to installation, place the monitor face down on a flat even surface that is larger than the monitor screen.
Use a sturdy table that can easily support the weight of the monitor.
* : WM-55UN-L or WM-55UN-P.
1

Using a Wall Mount Adapter

If the mounting accessory interferes with ventilation holes, use the included wall mount adapters (Dia. 14 mm) and screws. If the
adapter screws are too long, include a washer to reduce the depth. Washer not included.


NOTEE: Pictured mounting accessories may not be available in some countries.
For NEC mounting accessory only*
VESA Mounting Interface (M6)
400 mm
Wall mount adapter (Dia. 14 mm)
Unit
18 mm
10-12 mm
English−13
1
Mounting bracket
Washer
Wall mount adapter screw