Table of Contents
Advertisement
PROBLEM
There is no display on the computer.
The recumbent bike wobbles when in use.
The recumbent bike makes squeaking noise
when in use.
TROUBLESHOOTING
1.
2.
3.
Turn the adjustable end caps on the front and
rear stabilizers as
recumbent bike.
Some bolts on the recumbent bike might have
become loose. Please inspect all the bolts and
tighten any loosened bolts.
20
SOLUTION
Remove the computer and verify that the
wire
from
the
computer
connected to the wire that comes from the
front post.
Check
if
the
batteries
positioned and battery springs are in proper
contact with batteries.
The batteries in the computer may be
unresponsive. Change to new batteries.
needed
is
properly
are
correctly
to
level the
Advertisement
Table of Contents
