Troubleshooting - Sunny Health & Fitness SF-B2618 User Manual

ADJUSTMENTS & USAGE GUIDE
CLEANING
The bike can be cleaned with a soft, clean, and damp cloth. Do not use abrasives or solvents on
the plastic parts. Please wipe your perspiration off the bike after each use. Be careful not to get
excessive moisture on the computer display panel as this might cause electrical hazard or
electronics to fail.
Please keep the bike, especially the computer out of direct sunlight to prevent screen damage.
Please inspect all assembly bolts and pedals on the bike for proper tightness every week.
STORAGE
Store the bike in a clean and dry environment away from children.
PROBLEM
There is no display on the computer.
The bike wobbles when in use.
The bike makes squeaking noise when in
use.
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension Control Knob (No.
45) clockwise to increase the level of resistance. Rotate the
Tension Control Knob (No. 45) counter-clockwise to decrease
the level of resistance.
MOVING THE BIKE
To move the bike, hold the Right & Left Handrail Arm (No. 13
& No. 14) and tilt the bike until the Movable Wheels located on
the Front Stabilizer (No. 50) touch the ground. With the wheels
on the ground, you can transport the bike to the desired location
with ease.

TROUBLESHOOTING

1. Remove the computer and verify the wire that
comes
connected to the wire that comes from the
main frame.
2. Check if the batteries are correctly positioned
and battery springs are in proper contact with
batteries.
3. The batteries in the computer may be
unresponsive. Change the batteries.
Turn the end cap on the rear stabilizer as needed
to level the bike.
The bolts may have become loose on the bike.
Please inspect all the bolts and tighten any loose
bolts.
8
SOLUTION
from the computer is properly