Table of Contents
Advertisement
Getting help
Press F1 to pop up a small help window. On screen information
describes the appropriate keys to use and the possible selections
for the highlighted item. To exit the Help Window press Esc or the
F1 key again.
In Case of Problems
If, after making and saving system changes with Setup, you
discover that your computer no longer is able to boot. Award BIOS
supports an override to the CMOS settings that resets your system
to its default configuration.
You can invoke this override by immediately pressing Insert; when
you restart your computer. You can restart by either using the ON/
OFF switch, the RESET button or by pressing Ctrl-Alt-Delete.
The best advice is to alter only settings that you thoroughly
understand. In particular, do not change settings in the Chipset
screen without a good reason. The Chipset defaults have been
carefully chosen by Award Software or your system manufacturer
for the best performance and reliability. Even a seemingly small
change to the Chipset setup may cause the system to become
unstable.
Advertisement
Table of Contents
