1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Single board computers
  5. PFM-CVS
  6. Manual

Aaeon PFM-CVS Manual

Hide thumbs Also See for PFM-CVS:
Table of Contents

Advertisement

Quick Links

Download this manual
P C / 1 0 4 M o d u l e
P F M - C V S R e v . B
PFM-CVS Rev.B
®
Intel
Atom™ N2600 Processor
DDR3 1067MHz SODIMM
18-bit Single Channel LVDS LCD
4 USB2.0, 4 COM, 1 SATA, 1 mSATA
+
　 1 10/100/1000Base-TX Ethernet, PC/104
Half/Full size Mini Card (Optional)
PFM-CVS Rev. B Manual 2nd Ed
December 2013

Advertisement

Table of Contents
loading

Related Manuals for Aaeon PFM-CVS

Summary of Contents for Aaeon PFM-CVS

  • Page 1 PFM-CVS Rev.B ® Intel Atom™ N2600 Processor DDR3 1067MHz SODIMM 18-bit Single Channel LVDS LCD 4 USB2.0, 4 COM, 1 SATA, 1 mSATA 　 1 10/100/1000Base-TX Ethernet, PC/104 Half/Full size Mini Card (Optional) PFM-CVS Rev. B Manual 2nd Ed December 2013...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Acknowledgments All other products’ name or trademarks are properties of their respective owners. ® ®  Intel and Atom™...
  • Page 4 Before you begin installing your card, please make sure that the following materials have been shipped:  Jumper Cap  Product CD  PFM-CVS Rev. B with Heatsink If any of these items are missing or damaged, please contact your distributor or sales representative immediately.

  • Page 5: Table Of Contents

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ............... 1-3 1.3 Specifications ............... 1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.16 PCI-104 Connector (CN6)........2-15 2.17 Front Panel Connector (CN7) ........2-15 2.18 +12VSB Power Input Connector (CN9) ....2-16 2.19 PC/104/ ISA Connector (CN11) .......
  • Page 7 P C / 1 0 4 M o d u l e P F M - C V S R e v . B 3.2 AMI BIOS Setup ............3-3 Chapter 4 Driver Installation 4.1 Installation ..............4-3 Appendix A Programming The Watchdog Timer A.1 Watchdog Timer Initial Program .......A-2 Appendix B I/O Information B.1 I/O Address Map ............B-2...

  • Page 8: Chapter 1 General Information

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 9: Introduction

    NM10 that make this board achieve high performance. It features one 10/100/1000Base-TX Ethernet port, four USB 2.0 ports, four COM ports. In addition, the PFM-CVS Rev. B equips PC/104+ socket and Half/Full size mSATA/ Mini Card (optional) for flexible expansions.

  • Page 10: Features

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 1.2 Features ® Fanless Intel Atom™ N2600 Dual Core 1.6 GHz Processor ® Intel Atom™ N2600 + NM10 204-pin DDR3 1067 MHz SODIMM x 1, Max.

  • Page 11: Specifications

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 1.3 Specifications System Form Factor PC/104 ® Processor Intel Atom™ N2600 1.6 GHz processor System Memory 204-pin DDR3 1067 MHz SODIMM x 1, Max.
  • Page 12 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Operating Temperature 32°F~ 140°F (0°C ~ 60°C) WiTAS 2 : -40°F~ 185°F (-40°C~85°C) (PFM-CVSW2-B10) Storage Temperature 32ºF ~ 140ºF (0ºC ~ 60ºC) Operating Humidity 0%~90% relative humidity,...
  • Page 13 P C / 1 0 4 M o d u l e P F M - C V S R e v . B thermal module is “SARCON® XR-HL” (1.2 W/m-K) or better. 1- 6 Chapter 1 General Information...
  • Page 14 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Limitation Notice on ISA Interface Support According to the information from Intel for Atom™ Processor design, ®...

  • Page 15: Chapter 2 Quick Installation Guide

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Chapter Quick Installation Guide Chapter 2 Quick Installation Guide...

  • Page 16: Safety Precautions

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 17: Location Of Connectors And Jumpers

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.2 Location of Connectors and Jumpers Component Side Chapter 2 Quick Installation Guide...
  • Page 18 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Solder Side Chapter 2 Quick Installation Guide...

  • Page 19: Mechanical Drawing

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.3 Mechanical Drawing Component Side Chapter 2 Quick Installation Guide...
  • Page 20 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Solder Side Chapter 2 Quick Installation Guide...

  • Page 21: List Of Jumpers

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 22: List Of Connectors

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 23 P C / 1 0 4 M o d u l e P F M - C V S R e v . B FAN1 FAN Connector(Reserved) LAN1 LAN Connector DIMM1 DDR3 SODIMM Connector CN15 Audio Connector CN18 PS2 Keyboard/Mouse Connector Chapter 2 Quick Installation Guide...

  • Page 24: Setting Jumpers

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 25: Lvds Voltage Selection (Jp2)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.7 LVDS Voltage Selection (JP2) 1 2 3 1 2 3 +3.3V Function +3.3V (Default) 2.8 AT/ATX Selection and LVDS Backlight Control Voltage Selection (JP3) +5V LVDS Backlight +12V LVDS Backlight...

  • Page 26: Com2 +5V/Ring/+12V Selection (Jp6)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.9 COM2 +5V/Ring/+12V Selection (JP6) +12V Ring Function +12V Ring (Default) 2.10 PCI-104 VIO Voltage Selection (JP7) 1 2 3 1 2 3 +3.3V...

  • Page 27: Pc/104 -5V/-12V Voltage Selection (Jp11) Reserved

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.12 PC/104 -5V/-12V Voltage Selection (JP11) Reserved -12V -5V GND JP11 Function -12V 2.13 Backlight Brightness Control Connector (CN2) Pin Name Signal Type Signal Level...

  • Page 28: Internal Lvds Connector (Cn3)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.14 Internal LVDS Connector (CN3) Pin Name Signal Type Signal Level LVDS_BKLEN LVDS_BKLCTL +3.3V/ LVDS Voltage +3.3V/ LVDS Voltage LVDS_CLKN...

  • Page 29: Sata Power Connector (Cn5)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B LVDS_TX1 LVDS_DDCDAT +3.3V LVDS_TX#1 LVDS_DDCCLK +3.3V 2.15 SATA Power Connector (CN5) Pin Name Signal Type Signal Level 2.16 PCI-104 Connector (CN6) Standard PCI-104 Slot 2.17 Front Panel Connector (CN7)

  • Page 30: 12Vsb Power Input Connector (Cn9)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B POWRR BUTTON# External Buzzer(+) External Buzzer(-) HDD LED HDD LED# POWER LED POWER LED# RESET RESET# 2.18 +12VSB Power Input Connector (CN9) Pin Name Signal Type...

  • Page 31: Digital I/O Connector (Cn12)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.20 Digital I/O Connector (CN12) Pin Name Signal type Signal Level GPI0 GPI1 GPI2 GPI3 GPO0 GPO1 GPO2 GPO3...

  • Page 32: Mini Pci Express/Msata Connector (Cn14) (Optional)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B GPO1 Bit 5 of 0xA00 GPO2 Bit 6 of 0xA00 GPO3 Bit 7 of 0xA00 2.21 Mini PCI Express/mSATA Connector (CN14) (Optional) Standard Mini PCI Express Connector (52Pins) Pin Name Signal Type...
  • Page 33 P C / 1 0 4 M o d u l e P F M - C V S R e v . B PCIE_MC_CKLP Reserved Reserved Reserved Reserved W_DISABLE# BUF_PLTRST# PCIE_RXN1 DIFF +3V3_MC +3.3V PCIE_RXP1 DIFF +1.5V +1.5V SMBCLK_SBY PCIE_TXN1 DIFF SMBDAT_SBY...
  • Page 34 P C / 1 0 4 M o d u l e P F M - C V S R e v . B USBP4+ DIFF +3V3_MC +3.3V +3V3_MC +3.3V Reserved Reserved Reserved Reserved Reserved +1.5V +1.5V Reserved Reserved +3V3_MC +3.3V Standard mSATA Connector (52 Pins) Pin Name...
  • Page 35 P C / 1 0 4 M o d u l e P F M - C V S R e v . B +3V3_MC +3.3V Reserved Reserved +1.5V +1.5V MC_CLKREQ# Reserved Reserved PCIE_MC_CKLN Reserved PCIE_MC_CKLP Reserved Reserved Reserved Reserved W_DISABLE# BUF_PLTRST# SATA_RXP1...
  • Page 36 P C / 1 0 4 M o d u l e P F M - C V S R e v . B +1.5V +1.5V SMBCLK_SBY SATA_TXN1 DIFF SMBDAT_SBY SATA_TXP1 DIFF USBP4- DIFF USBP4+ DIFF +3V3_MC +3.3V +3V3_MC +3.3V Reserved Reserved Reserved...

  • Page 37: Battery Connector (Bt1)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Reserved +3V3_MC +3.3V 2.22 Battery Connector (BT1) Pin Name Signal Type Signal Level RTCBAT +3.3V 2.23 SATA Connector (SATA1) Pin Name Signal Type Signal Level...

  • Page 38: Crt Connector (Vga1)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.24 CRT Connector (VGA1) Pin Name Signal Type Signal Level VSYNC HSYNC BLUE GREEN 2-24 Chapter 2 Quick Installation Guide...

  • Page 39: Com1 Rs-232 Connector (Com1)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.25 COM1 RS-232 Connector (COM1) Pin Name Signal Type Signal Level DCD1 DSR1 RXD1 RTS1 ±9V TXD1 ±9V CTS1...
  • Page 40 P C / 1 0 4 M o d u l e P F M - C V S R e v . B RXD2 RTS2 ±9V TXD2 ±9V CTS2 DTR2 ±9V RS-422 Pin Name Signal Type Signal Level ±5V ±5V +5V/+12V +5V/+12V...

  • Page 41: Com3 Rs-232 Connector (Com3)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B A (Data+) ±5V +5V/+12V +5V/+12V 2.27 COM3 RS-232 Connector (COM3) Pin Name Signal Type Signal Level DCD3 DSR3 RXD3...

  • Page 42: Com4 Rs-232 Connector (Com4)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.28 COM4 RS-232 Connector (COM4) Pin Name Signal Type Signal Level DCD4 DSR4 RXD4 RTS4 ±9V TXD4 ±9V CTS4...

  • Page 43: Usb2.0 Connector (Usb2)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.30 USB2.0 Connector (USB2) Pin Name Signal Type Signal Level USB_VCC0 USBP1- USBP1+ 2.31 USB2.0 Connector (USB3) Pin Name Signal Type Signal Level...

  • Page 44: Usb2.0 Connector (Usb4)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.32 USB2.0 Connector (USB4) Pin Name Signal Type Signal Level USB_VCC1 USBP3- USBP3+ 2.33 FAN Connector (FAN1) Reserved Pin Name Signal Type Signal Level...

  • Page 45: Lan Connector (Lan1)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.34 LAN Connector (LAN1) Pin Name Signal Type Signal Level LAN1_TX1+ DIFF. LAN1_TX1- DIFF. LAN1_RX1+ DIFF. LAN1_RX1- DIFF.

  • Page 46: Audio Connector (Cn15)

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2.36 Audio Connector (CN15) Pin Name Signal Type Signal Level MIC_L MIC_R LIN_L LIN_R LOUT_L LOUT_R 2.37 PS2 Keyboard and Mouse Connector (CN18) 2-32 Chapter 2 Quick Installation Guide...
  • Page 47 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Pin Name Signal Type Signal Level KBDATA KBCLK +5VSB +5VSB MSDATA MSCLK 2-33 Chapter 2 Quick Installation Guide...
  • Page 48 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅...

  • Page 49: Chapter 3 Ami Bios Setup

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Chapter BIOS Setup Chapter 3 AMI BIOS Setup...

  • Page 50: System Test And Initialization

    4. The CMOS memory has lost power and the configuration information has been erased. The PFM-CVS Rev.B CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the Chapter 3 AMI BIOS Setup 3-2...

  • Page 51: Ami Bios Setup

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B complete unit when it finally runs down. 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 52 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Setup Menu Setup submenu: Main Options summary: (default setting) System Date Day MM:DD:YYYY Change the month, year and century. The ‘Day’ is changed automatically. System Time HH : MM : SS Change the clock of the system.
  • Page 53 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Setup submenu: Advanced Chapter 3 AMI BIOS Setup 3-5...
  • Page 54 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) ACPI Settings System ACPI Parameters CPU Configuration CPU Configuration Parameters IDE Configuration IDE Device Options Settings USB Configuration USB Configuration Parameters...
  • Page 55 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ACPI Settings Options summary: (default setting) ACPI Sleep State S3 only(Suspend to RAM) Select the ACPI state used for System Suspend Chapter 3 AMI BIOS Setup 3-7...
  • Page 56 P C / 1 0 4 M o d u l e P F M - C V S R e v . B RTC Wake Settings Chapter 3 AMI BIOS Setup 3-8...
  • Page 57 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) Wake system with Fixed Disabled Time Enabled Enable or disable System wake on alarm event. Wake up time is setting by following settings.
  • Page 58 P C / 1 0 4 M o d u l e P F M - C V S R e v . B CPU Configuration Options summary: (default setting) Hyper-Threading Disabled Enabled En/Disable CPU Hyper-Threading function Chapter 3 AMI BIOS Setup 3-10...
  • Page 59 P C / 1 0 4 M o d u l e P F M - C V S R e v . B IDE Configuration Options summary: (default setting) SATA Controller(s) Disabled Enabled En/Disable SATA controller Configure SATA as AHCI Configure SATA controller operating as IDE/AHCI mode.
  • Page 60 P C / 1 0 4 M o d u l e P F M - C V S R e v . B USB Configuration Chapter 3 AMI BIOS Setup 3-12...
  • Page 61 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) Legacy USB Support Enabled Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS.
  • Page 62 P C / 1 0 4 M o d u l e P F M - C V S R e v . B F81866 Super IO Configuration Options summary: (default setting) Serial Port 1/2/3/4 Configuration Set Parameters of Serial Port 1/2/3/4 Power Failure Keep last state Always on...
  • Page 63 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Serial Port 1 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=3F8h;...
  • Page 64 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Serial Port 2 Configuration Chapter 3 AMI BIOS Setup 3-16...
  • Page 65 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=2F8h; IRQ=3; IO=3F8h;...
  • Page 66 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Serial Port 3 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=3E8h;...
  • Page 67 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Serial Port 4 Configuration Options summary: (default setting) Serial Port Disabled Enabled En/Disable specified serial port. Change Settings Auto IO=2E8h;...
  • Page 68 P C / 1 0 4 M o d u l e P F M - C V S R e v . B H/W Monitor Chapter 3 AMI BIOS Setup 3-20...
  • Page 69 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Digital IO DIO_P#1~4 Input Output DIO_P#5~8 Input Output Set GPIO as Input or Output DIO_P#1~4 Dire1ction DIO_P#5~8 Direction Chapter 3 AMI BIOS Setup 3-21...
  • Page 70 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Set GPIO Output as Hi or Low Setup submenu: Chipset Options summary: (default setting) Host Bridge Host Bridge Parameters South Bridge South Bridge Parameters...
  • Page 71 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Host Bridge Options summary: (default setting) Graphics Configuration Graphics Configuration Setting. Chapter 3 AMI BIOS Setup 3-23...
  • Page 72 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Graphics Configuration Chapter 3 AMI BIOS Setup 3-24...
  • Page 73 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) Fixed Graphics Memory 128MB Size 256MB Configure Fixed Graphics Memory Size IGFX - Boot Type VBIOS Default Select boot display device.
  • Page 74 P C / 1 0 4 M o d u l e P F M - C V S R e v . B South Bridge Chapter 3 AMI BIOS Setup 3-26...
  • Page 75 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) Power Mode ATX Type AT Type Select the power type used on the system PCI Express Root Port 0 Disabled Enabled...
  • Page 76 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Setup submenu: Boot Options summary: (default setting) Quiet Boot Disabled Enabled En/Disable showing boot logo. Launch 82583V PXE OpROM Disabled Enabled En/Disable PXE boot for RTL8111E LAN...
  • Page 77 P C / 1 0 4 M o d u l e P F M - C V S R e v . B The order of boot priorities. BBS Priorities Options summary: (default setting) Boot Option #x Disabled Device name Sets the system boot order Chapter 3 AMI BIOS Setup 3-29...
  • Page 78 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Setup submenu: Security Chapter 3 AMI BIOS Setup 3-30...
  • Page 79 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) Administrator Password/ Not set User Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password.
  • Page 80 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Setup submenu: Exit Chapter 3 AMI BIOS Setup 3-32...
  • Page 81 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Options summary: (default setting) Save Changes and Reset Reset the system after saving the changes Discard Changes and Reset Reset system setup without saving any changes Restore Defaults Restore/Load Default values for all the setup options.

  • Page 82: Chapter 4 Driver Installation

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Chapter Driver Installation 4 - 1 Chapter 4 Driver Installation...
  • Page 83 P C / 1 0 4 M o d u l e P F M - C V S R e v . B The PFM-CVS comes with a CD-ROM that contains all drivers and utilities that meet your needs.
  • Page 84 P F M - C V S R e v . B 4.1 Installation: Insert the PFM-CVS Rev. B CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 6 in order. Step 1 – Install Chipset Driver 1.
  • Page 85 P C / 1 0 4 M o d u l e P F M - C V S R e v . B folder  Double click on the IEMGDInstall.exe  Select the configuration  Follow the instructions that the window shows ...
  • Page 86 P C / 1 0 4 M o d u l e P F M - C V S R e v . B 4 - 5 Chapter 4 Driver Installation...
  • Page 87 P C / 1 0 4 M o d u l e P F M - C V S R e v . B If you want to update driver, please uninstall driver first. Uninstall IEMGD 1. Double click on the IEMGDInstall.exe 2.
  • Page 88 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Step 4 – Install AUDIO Driver 1. Click on the Step 4 – AUDIO folder and select the OS your system is 2.
  • Page 89 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Step 2: Setup OS Step 3: Press “F6” 4 - 8 Chapter 4 Driver Installation...
  • Page 90 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Step 4: Choose “S” Step 5: Choose “Intel(R) NM10 Express Chipset” 4 - 9 Chapter 4 Driver Installation...
  • Page 91 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Step 6: It will show the model number you select and then press “ENTER” Step 7: Setup is starting Windows 4 - 10 Chapter 4 Driver Installation...
  • Page 92 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Step 8: Install Rapid Storage Technology Click on the Rapid Storage Technology folder Double click on the setup.exe file Follow the instructions that the window shows The system will help you install the driver automatically Step 6 –...
  • Page 93 P C / 1 0 4 M o d u l e P F M - C V S R e v . B 4. Check the driver installation in the device manager ® For Windows 7 32-bit/ 64-bit 1. Modify the UAC (User Account Control) setting to Never notify 4 - 12 Chapter 4 Driver Installation...
  • Page 94 P C / 1 0 4 M o d u l e P F M - C V S R e v . B 2. Restart the operating system. 4 - 13 Chapter 4 Driver Installation...
  • Page 95 P C / 1 0 4 M o d u l e P F M - C V S R e v . B 3. Click on the STEP6 - Serial Port Driver (Optional) folder and select the OS folder. 4.
  • Page 96 P C / 1 0 4 M o d u l e P F M - C V S R e v . B 4 - 15 Chapter 4 Driver Installation...

  • Page 97: Appendix A Programming The Watchdog Timer

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 98: Watchdog Timer Initial Program

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B A.1 Watchdog Timer Initial Program Table 1 : SuperIO relative register table   Default Value Note  SIO MB PnP Mode Index Register  Index  0x2E   (Note1) 0x2E or 0x4E  SIO MB PnP Mode Data Register  Data ...
  • Page 99 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ // SuperIO relative definition (Please reference to Table 1)  #define byte    SIOIndex    //This parameter is represented from Note1  #define byte    SIOData    //This parameter is represented from Note2  #define    void    IOWriteByte(byte IOPort, byte Value);  #define ...
  • Page 100 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************  Main VOID    (){    // Procedure : AaeonWDTConfig    // (byte)Timer : Time of WDT timer.(0x00~0xFF)    // (boolean)Unit : Select time unit(0: second, 1: minute).    AaeonWDTConfig();      // Procedure : AaeonWDTEnable  // This procudure will enable the WDT counting. ...
  • Page 101 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ // Procedure : AaeonWDTEnable  AaeonWDTEnable () VOID    {  WDTEnableDisable( );  EnableLDN, EnableReg, EnableBit, 1 }    // Procedure : AaeonWDTConfig  AaeonWDTConfig () VOID    {  // Disable WDT counting ...
  • Page 102 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ SIOEnterMBPnPMode() VOID    {    IOWriteByte(SIOIndex, 0x87);    IOWriteByte(SIOIndex, 0x87);  }    SIOExitMBPnPMode() VOID    {    IOWriteByte(SIOIndex, 0xAA); ...

  • Page 103: Appendix B I/O Information

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B Appendix I/O Information Appendix B I/O Information...

  • Page 104: I/O Address Map

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B B.1 I/O Address Map Appendix B I/O Information...
  • Page 105 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Appendix B I/O Information...

  • Page 106: St Mb Memory Address Map

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B B.2 1 MB Memory Address Map Appendix B I/O Information...

  • Page 107: Irq Mapping Chart

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B B.3 IRQ Mapping Chart Appendix B I/O Information...
  • Page 108 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Appendix B I/O Information...
  • Page 109 P C / 1 0 4 M o d u l e P F M - C V S R e v . B Appendix B I/O Information...

  • Page 110: Dma Channel Assignments

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B B.4 DMA Channel Assignments Appendix B I/O Information...

  • Page 111: Appendix C Mating Connector

    P C 1 0 4 B o a r d P F M - C V S B R e v . B   Appendix Mating Connector C - 1 Appendix C Mating Connector...

  • Page 112: List Of Mating Connectors And Cables

    P C 1 0 4 B o a r d P F M - C V S B R e v . B C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Mating Connector Available Cable P/N...
  • Page 113 P C 1 0 4 B o a r d P F M - C V S B R e v . B   COM2 CATCH H752-09 CATCH 1701090150 COM2 RS232/422/ Connector COM3 CATCH H752-09 CATCH 1701090150 COM3 RS232 Connector COM4 CATCH H752-09...

  • Page 114: Appendix D Electrical Specifications For I/O Ports

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B A ppendix Electrical Specifications for I/O Ports Appendix D Electrical Specifications for I/O Ports...

  • Page 115: D.1 Electrical Specifications For I/O Ports

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B D.1 Electrical Specifications for I/O Ports Reference Signal Name Rate Output Backlight Brightness +5V/0.5 or Control +12V/0.5 Connector Iternal LVDS...

  • Page 116: Dio Programming

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B D.2 DIO Programming PFM-CVS Rev.B utilizes FINTEK 81866 chipset as its Digital I/O controller. Below are the procedures to complete its configuration and the AAEON initial watchdog timer program is also attached based on which you can develop customized program to fit your application.

  • Page 117: Digital I/O Register

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B D.3 Digital I/O Register Table 1 : SuperIO relative register table    Default Value Note  SIO MB PnP Mode Index Register  Index  0x2E   (Note1) 0x2E or 0x4E  SIO MB PnP Mode Data Register  Data  0x2F  ...

  • Page 118: Digital I/O Sample Program

    P C / 1 0 4 M o d u l e P F M - C V S R e v . B D.4 Digital I/O Sample Program ************************************************************************************ // SuperIO relative definition (Please reference to Table 1)  #define byte    SIOIndex    //This parameter is represented from Note1  #define byte    SIOData    //This parameter is represented from Note2  #define ...
  • Page 119 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ // Digital Output control relative definition (Please reference to Table 3)  #define byte    DOutput1LDN    // This parameter is represented from Note27  #define byte    DOutput1Reg    // This parameter is represented from Note28  #define byte    DOutput1Bit    // This parameter is represented from Note29  #define byte ...
  • Page 120 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ Main VOID    (){    Boolean PinStatus ;      // Procedure : AaeonReadPinStatus    // Input :    //  Example, Read Digital I/O Pin 3 status  // Output :  // ...
  • Page 121 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ AaeonReadPinStatus(byte LDN, byte Register, byte BitNum) Boolean    {    Boolean PinStatus ;      PinStatus = SIOBitRead(LDN, Register, BitNum);    Return PinStatus ;  }  AaeonSetOutputLevel(byte LDN, byte Register, byte BitNum, byte Value) VOID    { ...
  • Page 122 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ SIOEnterMBPnPMode() VOID    {    IOWriteByte(SIOIndex, 0x87);    IOWriteByte(SIOIndex, 0x87);  }    SIOExitMBPnPMode() VOID    {    IOWriteByte(SIOIndex, 0xAA); ...
  • Page 123 P C / 1 0 4 M o d u l e P F M - C V S R e v . B ************************************************************************************ SIOBitRead(byte LDN, byte Register, byte BitNum) Boolean    {    Byte TmpValue;      SIOEnterMBPnPMode();  SIOSelectLDN(LDN);  IOWriteByte(SIOIndex, Register);  TmpValue = IOReadByte(SIOData);    TmpValue &= (1 << BitNum);    SIOExitMBPnPMode(); ...

Table of Contents