Miele DGC 5080 XL Operating Instructions Manual page 69

Problem
F 190
F 196
F ..
Any other fault
messages
Possible cause
The water inlet valve is
faulty.
There is a fault.
The filter in the bottom of the
oven cavity is incorrectly
positioned.
Technical fault.
Problem solving guide
Remedy
This fault can occur if the
control panel is opened or
shut during the water intake
process. Confirm with "OK"
and start operation.
If the same message
appears again, call the Ser-
vice Department.
Switch the appliance off
and then back on again.
Switch the appliance off,
re-position the filter:
and then switch the
appliance back on again.
If, having corrected the
problem, the fault message
appears again, contact the
Service department.
Switch the appliance off
and call the Service
Department.
69