Miele DGC 5080 XL Operating Instructions Manual page 64

Cleaning and care
To refit the door
64
^ Insert the inner pane with the printed text facing
downwards. Push the pane in as far as possible. Make sure
that you do not dislodge the side seals when you do so.
The seal must be positioned correctly to prevent any
steam penetrating inside the door.
^ Place the guides back on and screw them on securely.
^ Hold the door securely at both sides and carefully fit it back
onto the hinge guides.
Make sure that the door goes back on straight.
^ Open the door fully.
^ Turn the locking clamps as far as they will go into a
horizontal position.
It is essential that the locking clamps lock securely when
the door is re-fitted after cleaning. Otherwise the hinges
could work loose, resulting in damage to the door.