SMA Solar Technology AG
4. Check the Electronic Solar Switch for wear, as
described in section 8.3 and attach it firmly.
NOTICE!
Manipulating the connector in the handle can damage the
Electronic Solar Switch.
The connector inside the handle must remain movable in order to ensure proper contact.
Tightening the screw voids all warranty claims and creates a fire risk.
• Do not tighten the connector screw in the Electronic Solar Switch handle.
NOTICE!
Electronic Solar Switch can be damaged.
If it is not correctly connected, the Electronic Solar Switch can be damaged by high
voltages.
• Plug the handle firmly onto the jack of the Electronic Solar Switch.
• Make sure that the device is securely in place.
5. Switch on the miniature circuit‑breaker.
6. Check whether the display and the LEDs indicate a
normal operating state (see section
6 "Commissioning" (page 48)).
☑ The inverter is now closed and in operation.
Installation Manual
Opening and Closing
SMC46-60A-IA-IEN120471
59