SMA SUNNY MINI CENTRAL 4600A Installation Manual page 36

Electrical Connection
8. Check the Electronic Solar Switch for wear, as
described in section 8.3 "Checking the Electronic
Solar Switch (ESS) for Wear" (page 64) and attach
it firmly.
NOTICE!
Manipulating the connector in the handle can damage the Electronic Solar
Switch.
The connector inside the handle must remain movable in order to ensure proper contact.
Tightening the screw voids all warranty claims and creates a fire risk.
• Do not tighten the connector screw in the Electronic Solar Switch handle.
NOTICE!
Electronic Solar Switch can be damaged.
If it is not correctly connected, the Electronic Solar Switch can be damaged by high
voltages.
• Plug the handle firmly onto the jack of the Electronic Solar Switch.
• Make sure that the device is securely in place.
☑ The PV array is connected.
You can now commission the inverter as described in section 6 "Commissioning" (page 48).
The following connections are optional.
36 SMC46-60A-IA-IEN120471
SMA Solar Technology AG
Installation Manual