Assembling The Dc Connectors - SMA SUNNY MINI CENTRAL 4600A Installation Manual

Electrical Connection
5.4.2 Assembling the DC Connectors
All PV module connection cables must be equipped with the included DC connectors before
connecting them to the inverter.
To assemble the DC connectors, proceed as follows. Ensure the connectors have the correct polarity.
The DC connectors have the symbols "+" and "‒".
Cable requirements:
• Use a PV1‑F cable.
Procedure
1. Lead the stripped cable all the way into the plug.
2. Press the clamping bracket down until it audibly
snaps into place.
3. Ensure that the cable is correctly positioned:
Result
☑ If the stranded wire is visible in the chamber
of the clamping bracket, the cable is
correctly positioned.
30 SMC46-60A-IA-IEN120471
...
Measure
• Proceed to step 4.
SMA Solar Technology AG
...
Installation Manual