Breas NIPPY Quick Reference Manual

Usage of Oxygen
• O must be turned off when the Nippy 4 is not in
2
operating mode!
• It is recommended to monitor the oxygen
concentrations.
1. Mount the oxygen tube to
the connector.
2. Connect the oxygen tube. A
click sound is heard when the
tube is properly attached.
Disconnect:
1. Press the release button to
disconnect the oxygen tube.
2. Remove the tube.
3. Turn off the oxygen source.
Replacing the Patient Air Inlet Filters
The patient air filters are located in
the filter cassette at the side of the
ventilator.
Washable Filter (grey): Replace at
2
least once a year, wash at least
once a week.
Disposable Filter (white): Replace
at least every 4th week, or more
often in high pollution or pollen-
rich environments.
Symbols
S D
YMBOL
Internal battery
Click-in battery level
Keypad lock activated
Keypad lock deactivated
Click-in Humidifier (accessory)
Heated circuit (accessory)
Multiple pages
1
ESCRIPTION
Quick Reference Guide
Doc. 007612 M-2
2022-11-30