Advertisement
Quick Links
Quick Set Up Guide
for IPPB
TREATMENT SETTINGS
Check the exsufflation
pressure is set at zero
Adjust FLOW PROFILE
Set insufflation repeats
Set appropriate
insufflation pressure
Set Ti, PAUSE times
LOCK/UNLOCK
To lock or unlock the
device, push and hold the
+ and – buttons
simultaneously for until
the padlock on the bottom
right of the screen
locks/unlocks
SELECT MODE
With the device unlocked,
push the MODE button
Chose either TRIGGERED
AUTO or TIMED AUTO as
appropriate for your
patient
Advertisement
Related Manuals for Breas NIPPY Clearway
Summary of Contents for Breas NIPPY Clearway
- Page 1 LOCK/UNLOCK Quick Set Up Guide To lock or unlock the device, push and hold the for IPPB + and – buttons simultaneously for until the padlock on the bottom right of the screen locks/unlocks TREATMENT SETTINGS SELECT MODE Check the exsufflation With the device unlocked, pressure is set at zero push the MODE button...
- Page 2 Hints & Tips Parameter Range Clinical Implication Lock and unlock procedure is the same Pressure 0-60 cm Measured by pressure line, accurate in delivery at patient end. Titrate as required When using the Triggered Auto mode don’t forget to adjust the trigger sensitivity settings 0.1-5 Sec Increase as tolerated to enable effective inhalation and expansion.