Instrument Connections - Advanced Energy 1316 User Manual

Instrument Connections

WARNING:
safety equipment (e.g., fuses, breakers, etc.) as necessary between the AC Power
Source and Voltage/Current RF Adapter. Failure to install adequate safety equipment
may result in death or bodily injury, or equipment damage.
1. Connect the Voltage/Current RF Adapter through an appropriately sized fuse or breaker
to the AC Power Source. See Figure 1 below.
Figure 1: Voltage/Current RF Adapter connections to the AC Power Source.
WARNING:
system. Users should install interlock devices as appropriate for safe operation.
2. Connect interlocks (user-supplied) to the Calorimeter and system as necessary.
3. Connect the Calorimeter and Power Analyzer ethernet ports to the network.
4. Connect the AC Power Source to the network using the ethernet port or the RS-232
serial connection. Ethernet is preferred.
5. Connect the thermocouple from the Calorimeter to the 12 kW Chiller as shown in
Figure 2.
1316-900 Revision AA
High voltage and current are present on the system. Install proper
Dangerous voltage, current, and RF power may be present on the
10kW Precision Calorimeter
12