Table of Contents
Advertisement
Instrument Connections
The 2818A has an SMA input port for connection to an RF signal generator and N-Type
output port for connection to the DUT.
The 2818A must be connected to a computer via USB to use.
1. Connect the USB Cable to the port on the back of the 2818A.
2. Connect other end of USB cable to computer
3. Start the appropriate software to access the 2818A
2818A-900 Revision AB
Figure 1: Rear of 2818A
Figure 2: Computer USB Connection
RF Power Transfer Standard
8
Advertisement
Table of Contents
