Commissioning; Installing Esi[Tronic] - Bosch KTS Truck Original Instructions Manual

4.

Commissioning

4.1

Installing ESI[tronic] 2.0

1. End all open applications.
2. Insert the "ESI[tronic] 2.0" DVD in the DVD drive.
3. Start "Windows Explorer".
4. Start 'D:\RBSETUP.EXE' (D = DVD drive letter).
« Set-up is started.
5. Heed and follow the instructions on the screen.
i
If installing without I-Key, the components (e.g. types
of info) must be selected manually.
i
If there is no PDF reader on the PC/laptop, install
Adobe Acrobat Reader. The PDF reader is required
for displaying the KTS Truck control unit diagnosis
logs on the PC/laptop.
i
After installing ESI[tronic] 2.0, the user is requested
to insert the "ESI[tronic] DVD 1 Diagnosis, main-
tenance, replacement parts". ESI[tronic] installa-
tion and ESI[tronic] release are described on the
"ESI[tronic] DVD 1 Diagnosis and technology" in the
directory 'DOCS\SETUP\SETUP_DE.PDF'.
Robert Bosch GmbH
Commissioning | KTS Truck | 23
6. Select the option KTS Truck is connected using
a USB cable.
i
The message "New hardware found" appears on the
screen for a few seconds on connecting KTS Truck
by way of the USB connecting cable. This indicates
recognition of the USB connection to KTS Truck.
7. Press <Continue> to proceed with installation.
i
Following installation a check is made as to whether
the firmware on KTS Truck is up-to-date. If the
KTS Truck firmware is not the latest version it will
be automatically updated.
!
Firmware updates must always be performed using
the USB connecting cable (not by way of Bluetooth).
In the case of a failed firmware update go through
the "ESI[tronic] 2.0 - Installation" once more.
"
ESI[tronic] 2.0 has now been installed.
en
|
1 689 989 100 2013-03-11