General Safety Directions For Power Tools - Parkside PWS 125 B2 Translation Of The Original Instructions

Wear ear protection
Wear eye protection
Wear breathing protection
Risk of cuts!
Wear cut-resistant gloves.
Safety class II
Electrical machines do not belong
with domestic waste.
Other symbols on the
cutting disc:
Do not use for side grinding
Do not use for wet grinding
Do not use defective discs
Suitable for metal
Wear safety shoes
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preventi-
on of harm / damage.
Notice symbol with information on
how to handle the device properly.
General Safety Directions for
Power Tools
WARNING! READ ALL SAFETY
DIRECTIONS AND INSTRUC-
TIONS. Omissions in the compliance
with safety directions and instructions
can cause electrical shock, fire and/
or severe injuries.
Retain all safety directions and inst-
ructions for future use.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool).
Work area safety :
• Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
Electrical safety :
CAUTION! The following states how
to avoid accidents and injuries due to
electric shock:
• Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
GB
69