Fuse Replacement; Faq; Modification Of The Maximum Setpoint Temperature; Product Registration - Zodiac RED LINE Instructions For Installation And Use Manual

5.2 Fuse replacement
 IMPORTANT! Disconnect power to the appliance!
 Remove the cover.
 Disconnect the regulator.
 Remove the regulator cover.
 Remove the fuse (T3, 15AH250V).
5.3 FAQ
Where should my water
treatment system be
positioned with respect
to the heating system?
Is it possible to improve
temperature
performance?
5.4 Modification of the maximum setpoint temperature
 Turn off the regulator (the "on" indicator light goes off, the pool water temperature is displayed).
 Simultaneously press and hold
 Press .
 Then enter the value "80" using the
 Press to confirm this code, "PA" is displayed.
 Simultaneously press and hold the
 Press
to scroll through each parameter until "r2" is displayed.
 Press , the current value of the parameter "r2" is displayed.
 Press
or to modify the maximum setpoint value.
 Press to confirm this new value.
 Simultaneously press and hold
6. Product registration
Register your product using our website:
- you will be among the first to be informed of new Zodiac products and special offers,
- You can help us to constantly improve our product quality.
7. Conformity certificate
Z.P.C.E. declares that the following products or ranges:
Special swimming pool heater: Red Line + 3‐6‐9‐12
are in compliance with the provisions of:
 the ELECTROMAGNETIC COMPATIBILITY directive 89/336/EEC
 the LOW VOLTAGE directive 73/23/EEC
H03609‐00.B1.EN – 2012/01
The water treatment system (chlorinator, salt chlorinator, etc.) must be installed
preferably downstream from the appliance (see installation §2.2), and must be
compatible with the latter (check with the manufacturer)
protect the pool with a cover (floating cover, roller cover, etc.), to avoid heat loss
Check that during the heating phase, water flow must be continuous (24/24)
filtration
to maintain the temperature throughout the season, allow for
time is
"automatic" flow of at least 12 hours/day (the longer automatic flow
sufficient
is used, the more time the appliance will have to function and to heat
the water)
and for 5 seconds, "PA" is displayed.
or
and
and for 5 seconds to return to the pool water temperature display.
Australia – New Zealand
South Africa
Europe and rest of the world
keys (access code to the settings menu).
keys for 5 seconds.
www.zodiac.com.au
www.zodiac.co.za
www.zodiac‐poolcare.com
6