Example Project For Central I/O Expansion; Preconditions; Create, Set-Up And Save Your Ac500 V2 Project - ABB AC500 V2 Getting Started

Table of Contents

1.5 Example project for central I/O expansion

The following steps show how to set-up an application project and configure the hardware. A

simple logic is used as example to introduce in programming and commissioning of the PLC.

The workflow for creation of a visualization is explained, as well as how to set-up a web server

for visualization.

●

Automation Builder is installed and licensed as, at least, basic edition.

●

AC500 V2 CPU is assembled and connected to the PC

V2" on page 10.

1.5.2.1

Create a project

2023/03/03

Example project for central I/O expansion > Create, set-up and save your AC500 V2 project

Plug the appropriate electronic and I/O modules in the correct locations (processor

module, communication modules on terminal base, and eventually also communication

interface modules and I/O modules onto dedicated terminal units).

Connect a programming cable (Ethernet cable between ETH port of CPU and PC with

engineering software).

Launch Automation Builder either out of the desktop icon or out of the Windows menu.

Select "New Project" or go to menu "File è New Project".

3ADR010649, 3, en_US

Getting started with example projects

Ä Chapter 1.4 "Hardware AC500

Table of Contents