Example Project For Remote I/O Expansion With Profinet; Preconditions; Set-Up Profinet Controller - ABB AC500 V2 Getting Started

Table of Contents

Getting started with example projects

Example project for remote I/O expansion with PROFINET > Set-up PROFINET controller

1.6 Example project for remote I/O expansion with PROFINET

This example introduces the configuration of the PLC with remote I/O. The use of I/O channels

in a program and commissioning of the configuration is shown.

●

Automation Builder is installed and licensed as, at least, standard edition.

●

AC500 V2 CPU is assembled and connected to the PC

V2" on page 10.

●

Configuration and programming of this example project will be made in the existing example

project for central I/O expansion

on page 13.

●

CM579-PNIO communication module is inserted in terminal base and connected to the PLC

Ä Chapter 1.4 "Hardware AC500 V2" on page 10.

●

CI502-PNIO communication interface module is inserted in terminal unit and connected to

the PLC

1.6.2.1

Add the CM579-PNIO to the device tree

Ä Chapter 1.4 "Hardware AC500 V2" on page 10.

In the Automation Builder device tree under "Extension_Bus", right-click "Slot_1".

Select "Add object".

Select "CM579-PNIO".

3ADR010649, 3, en_US

Ä Chapter 1.4 "Hardware AC500

Ä Chapter 1.5 "Example project for central I/O expansion"

2023/03/03

Table of Contents