Flexible Product Naming; Introduction; Mapping Example - ABB Relion SAM600 Communication Protocol Manual

1MRK 511 441-UEN Rev. C
Section 9
9.1

Introduction

The Flexible product naming tool in PCM600 allows the customer to use an IED-vendor independent
61850 model of the IED. This customer model will be exposed in all IEC 61850 communication, but
all other aspects of the IED will remain unchanged (for example, names on the local HMI and names
in the tools).
This offers significant flexibility to adapt the IED to the customers system and standard solution.
Benefits:
• IEDs uses the customer model for communication.
• Customer specific naming convention for communication can be used.
• Other IEDs and station level equipment can be defined from the customer specific
communication model.
• Error tracing of communication can be the same between different installations.
9.1.1

Mapping example

Non-affected function views
LHMI
view
PCM
view
... view
IEC15000502 V2 EN-US
Figure 19:
Mapping shown in Figure
Switchgear control unit SAM600-IO
Communication protocol manual

Flexible product naming

IED 61850 model
LD
FunctionA
FunctionB
L1PTOC in the customer model mapped to BPTOC in the IED model and L2PTOC
mapped to APTOC
19 results to mapping shown in Figure 20.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
FPN mapping Customer 61850 model
LD
APTOC
BPTOC
Flexible product naming
GUID-98BC22A7-8EFF-4CD0-829E-FBB5D8FD8024 v2
GUID-DD7F097C-1D72-4BA2-8684-61B54EF0D00C v1
LD L1PTOC
LD L2PTOC
IEC15000502-2-en.vsdx
Section 9
43