Date: 2021-01-13
Version: 1.5
4
Description of the assembly
4.1
Overview
Figure 1: Overview of central lubrication unit assembly
No. Component
1
Solenoid Valve
2
Local switch
3
Oil filter
4
Double diaphragm pump
5
Quick-release clamp
6
Plastic container
7
Process filter
Table 5: Components of the ZSD
© 2021 ABB Automation GmbH |
Operating and installation instructions
Central lubrication unit
Description of the assembly
Function
The solenoid valve switches the compressed air supply to the
double diaphragm pump and is actuated with an electrical signal
from the controller.
Main switch of the assembly.
The oil filter filters fine glue residue from the release agent.
Pumps the release agent to the dosing unit.
The cover plate is pressed against the plastic container/gasket
by means of the snap-lock.
Reservoir for the release agent
The lid with process filter filters coarse glue residue from the re-
lease agent.
Page 13 of 25
en