Setting The Water Hardness - Miele PIB 100 Operating Instructions Manual

Before using for the first time

Setting the water hardness

 Set water
hardness...
Before the water hardness can be set,
the display message 
must be acknowledged by press-
ness...
ing the OK button.
The steam ironing system gives you
the option to set the water hardness to
one of 10 settings.
Use the following table to determine the
water hardness level that must be set
for your steam ironing system:
°dH mmol/l
1-4 0.2 - 0.7
5-7 0.9 - 1.3
8-11 1.4 - 2.0
12-15 2.2 - 2.7
16-20 2.9 - 3.6
21-25 3.8 - 4.5
26-30 4.7 - 5.4
31-36 5.6 - 6.5
37-45 6.7 - 8.1
46-70 8.3 - 12.6
26
Set water hard-
°f Setting
2-7 Level 1
Level 2
9-13
14-20 Level 3
Level 4
22-27
29-36 Level 5
38-45 Level 6
47-54 Level 7
56-65 Level 8
67-81 Level 9
83-126 Level 10
Level 7
 Use the  or  arrow buttons on the
control panel to set the water hard-
ness level for your household.
Tip: If the water hardness fluctuates
(e.g. 37-50 °dH/6.7-9.0 mmol/l), always
set the highest value (in this example
50 °dH/9.0 mmol/l =
Make sure the correct water hard-
ness level is set.
An incorrect setting will invalidate all
warranty claims.
Level 10
 Confirm your selection by pressing
the OK button.
The steam ironing system is now set for
the specified water hardness.
The water hardness level can be
changed at any time via the settings
menu ( button,
option Water hardness
).
Level 10
).