Advertisement
EDW 4010
Styling Overview
Location of LEDs and Push Buttons
S1
S2
S3
S4
Technical Support – A.R.
EDW4010
Reset
Press the Program Key for at least 2 seconds, and then follow the
instructions on the screen to perform Reset function.
Access Service Mode
EDW4010 is a touch key model. After Reset an off/on, press button
S5+S7 simultaneously for at least 4 seconds to access Service
Mode.
S5
S6
After accessing Service mode, using the navigation buttons to
select the desired service function shown in screen and using "OK"
button to enter the selected function, then follow the instruction in
the screen to perform the functions.
Follow the instruction in the screen or switching off the appliance to
save the new setting and exit Service mode.
S8
S7
599 79 76 - 54 Rev 2
3.6
Chapter
Advertisement
