NOTE:
The A5800-48G (1 slot) and A5800-48G TAA (1 slot) switches come with the expansion interface card slot
covered by a filler panel. In this figure, an LSW1SP4P0 interface card is installed in the slot.
These two switches also come with the RPS receptacle covered by a protective cover.
A5800-48G-PoE+ (1 slot)/A5800-48G-PoE+ TAA
(1 slot) panel views
Figure 75 Front panel
(1) 10/100/1000Base-T auto-sensing Ethernet port
(3) Seven-segment LED
(5) SFP+ port LED
(7) System status LED (SYS)
(9) Interface card status LED (SLOT1)
(11) Port LED mode switching button
To use the console port and USB port, open the logo plate, as shown in
Figure 76 Rear panel
(1) RPS receptacle
(3) Grounding screw
NOTE:
The A5800-48G-PoE+ (1 slot) and A5800-48G-PoE+ TAA (1 slot) switches come with the expansion
interface card slot covered by a filler panel. In this figure, an LSW1SP4P0 interface card is installed in
the slot.
(2) 10/100/1000Base-T Ethernet port LED
(4) Port mode LED
(6) Logo plate (A console port and a USB port are
under this logo plate)
(8) RPS status LED (RPS)
(10) SFP+ port
(2) AC-input power receptacle
(4) Expansion interface card slot
79
Figure 72
and
Figure
73.