Hp 5900Af-48G-4Xg-2Qsfp+ Panel Views - HP 5920 Series Installation Manual

1 1, two LSVM1AC650 power supplies are installed. For more information about installing and removing
the power supply, see
The HP 5900AF-48XGT-4QSFP+ switch also comes with the fan tray slots empty. You must install two fan
trays for the 5900AF-48XGT-4QSFP+ for adequate heat dissipation, and their models must be the same.
In Figure 1 1, two LSWM1HFANSC fan trays are installed. For more information about installing and
removing the fan tray, see
Figure 9 HP 5900AF-48XGT-4QSFP+ left side panel
(1) Primary grounding point

HP 5900AF-48G-4XG-2QSFP+ panel views

Figure 10 HP 5900AF-48G-4XG-2QSFP+ front panel
(1) 10/100/1000Base-T autosensing Ethernet port
(3) SFP+ port
(5) QSFP+ port
(7) System status LED (SYS)
Figure 11 HP 5900AF-48G-4XG-2QSFP+ rear panel
(1) Grounding screw (auxiliary grounding point 2)
(3) Console port
(5) Fan tray slot 2
(7) Power supply slot 2
(9) ACT LED for the management Ethernet port
"Installing/removing a power
"Installing/removing a fan
supply."
tray."
(2) Auxiliary grounding point 1
(2) 10/100/1000Base-T autosensing Ethernet port LED
(4) SFP+ port LED
(6) QSFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power supply slot 1
(8) LINK LED for the management Ethernet port
(10) USB port
5