Download Print this page

Overland Storage REO Series Remove & Replace Instructions page 2

Remove and replace disk
Hide thumbs Also See for REO Series:

Advertisement

REO 1000 and 1500
IMPORTANT:
The REO 1000 and 1500 do NOT require new disks to be placed back in the same slot number as the old.
Remove Disk
1. (1500 only) Unlock the carrier.
Use a screwdriver to turn the lock on the disk carrier
lever counter-clockwise to the angled "unlocked"
position
(Figure
3).
Unlocked
Figure 3. Lock and Unlock Positions
2. Remove the disk.
a. On the front of the disk carrier, press the lever
release button to the right
b. Use the lever to pull the carrier and disk
out of the slot
(Figure
a. Release Button
b. Pull Disk Carrier Out
Figure 4. Remove Carrier
3. Remove the old disk from the carrier
a. Remove the four screws that hold the disk in the
carrier
(Figure
5) and set the screws aside.
Figure 5. Remove Screws
b. Remove the disk and set it aside.
Part Number 10400111-103 06/2007
00
Figure 1. REO 1000: No "Replace in Same Slot Number" Requirement
1
Figure 2. REO 1500: No "Replace in Same Slot Number" Requirement
Locked
.
(Figure
4).
4).
©2007 Overland Storage, Inc.
03
01
2
3
Replace Disk
1. Attach the new disk to the carrier.
Insert the new disk in the carrier and secure it using
the previously removed screws.
2. Insert and latch the carrier.
a. Making sure the carrier lever is in it's fully open/
extended position, place the carrier into the SAME
SLOT NUMBER from which it was removed.
b. Slide the carrier to the back of the slot, and as it
reaches the back press the lever in until it clicks
(locks). Pressing the lever in draws the carrier fully
into the slot and locks it in place.
3. (1500 only) Lock the carrier
Setup Disks
On the Internal Disk Management (version 2.5.0 or
later) or Physical Volume Management (version
2.4.0 or earlier) page, click the applicable Add,
Rebuild, or Create button, depending on what version
of software you are using and in what configuration.
For help, see your REO Setup Guide.
Return Removed Parts to Overland
Place the removed part in the replacement part's box, then
follow directions included on the box for returning parts to
Overland Storage.
04
4
(Figure
3).
2
Page
4
of

Advertisement

loading

This manual is also suitable for:

Reo 4500 disk carrierReo 4500 diskReo 9100 disk carrierReo 9100 disk