AT&T 8400 Series Instructions For Installation Manual page 51

Switch Administration
If you have
this System
System 75
System 85
Internat'l System 75
DEFINITY G1
Global DEFINITY '91
DEFINITY G2V1
DEFINITY G2V2
DEFINITY G3i, G3r,
G3s, G3vs
DEFINITY G3V2
DEFINITY G3V3 and
G3V4, Issue 1 & 2
DEFINITY G3V4, Issue 3
and later
DEFINITY G3V5
NOTE:
As noted in the above table, an 8411D aliased as a 7405 voice terminal
must be administered as a 7405+D, that is, with Display Module . On the
administration page, type a ''y'' (for Yes) on the blank next to ''Display?''
Notes on 8411 Administration (if used with DEFINITY G3V4,
Issue 3, or later):
The 8411D can be administered as itself ONLY IF it is connected to a
DEFINITY G3V4, Issue 3 (or later) switch. In Native Mode the voice
terminal is administered through a digital line circuit card with a line number
(with the usual three call appearances) assigned to the I1-Channel. A
second line number can be administered through the same digital line card
on the I2-Channel, but this line number can only be used for Analog
Adjuncts connected to the Analog Adjunct jack on the 8411. This Analog
Adjunct is assigned a private number, but can be used only for placing or
terminating a call. It cannot be used for any other analog functions such as
transferring a call or setting up a conference call.
If a second line on the 8411 is administered on the I2 channel (for analog
equipment) on the 8411, type ''analog'' in the Data Option field on the
administration screen. If the 8411 is connected to a personal computer for
use with PassageWay software, type a ''y'' in the PassageWay field also
46
Administering the 8411D Voice Terminal
and this
Release
R1V1 — R1V3
R2V2 — R2V4
IR1V4, etc.
R1V4
(which can administer
support this the 8411D
type of operation) as a
4-wire only 7405D+D
4-wire only 7405D+D
4-wire only 7405D+D
4-wire only 7405D+D
4-wire only 7405D+D
4-wire only 7405D+D
4-wire only 7405D+D
4-wire only 7405D+D
2- or 4-wire 7405D+D
2- or 4-wire 8410D
2- or 4-wire 8411D
2- or 4-wire 8411D